PEP-2

Manufacter
Abat
Type
For pizza
PEP-2 electric pizza oven is designated for baking pizza and bakery products which require high preparation temperature at public catering enterprises.
Key information:
Nominal power consumption, kWt | 4,8 |
Nominal voltage, V | 230 |
Time of heating up the cabinet to the operative 300° C temp., min. | 30 |
Number of sections | 1 |
Bottom surface, m2 | 0,26 |
Temp. regulation range of the cabinet, °C | 20-450 |
Internal dimensions of the cabinet, mm | 515x540x125 |
Number of tubular heating elements | 2 |
Overall dimensions, mm | 820x755x375 |
Weight, kg | 87 |
The capacity of one chamber is 4 pizzas with not less than 250 mm diameter. The oven structure is made of the metal painted by a polymeric paint. The working chamber is made of galvanized steel and is equipped with illumination. The bottom of the chamber consists of a heat-proof cordierite plate (fire clay stone), of 15 mm thickness. The door of enameled steel with an observation window made of heat-proof glass is equipped with recessed convenient handle. The upper and lower tubular heating units inside the chamber are regulated separately. Operative temperature range inside the chamber is +20°+450° C. Thermostat up to 500° C. The oven has a pointed indicator of a temperature level inside the chamber. The cleaning of the chamber is done by the pyrolysis method at maximum temperature +450° C. Pilot lamps on the control panel indicate contact potential of the tubular heating elements and signify operation readiness. The oven structure is provided with a slide valve which allows accurate regulation of the heated air, vapor and fume outlet from the working chamber. The oven PEP-2 is to be installed onto a table or mounted on a special support unit PP-2. The structure of the oven allows installation of 1, 2 or 3 PEP-2 ovens onto each other what significantly reduces the occupied place in the kitchen.